Ti
mer
23
US
8
Press ENTER.
The type of timer, followed by start time,
stop time and the music source appears in
the display.
9
Press
?/1
to turn off the system.
Other operations
Notes
• You cannot select the Play Timer and Timer
Recording at the same time.
• If you use Play Timer and Sleep Timer at the same
time, the Sleep Timer has priority.
• The Play Timer will not be activated if the system is
on.
Tips
• The system turns on 15 seconds before the preset
time.
• When the Play Timer is selected, “PLAY” lights up
in the display.
You can record from a preset radio station at the
specified time.
To timer record, you must first preset the radio
station (see “Presetting radio stations” on
page 13) and set the clock (see “Setting the
clock” on page 9).
1
Tune in the preset radio station (see
“Listening to a preset station” on
page 14).
2
Press CLOCK/TIMER SET.
“PLAY SET?” flashes in the display.
3
Press
M
or
m
(or
>
+ or –
.
on the
remote) repeatedly to select “REC
SET?”, then press ENTER.
“ON” appears and the hour indication
flashes in the display.
4
Set the time to start recording.
Press
M
or
m
(or
>
+
or
–
.
on the
remote) repeatedly to set the hour, then
press ENTER.
The minute indication flashes in the
display.
Press
M
or
m
(or
>
+
or
–
.
on the
remote) repeatedly to set the minute, then
press ENTER.
5
Set the time to stop recording following
the same procedure as step 4.
The type of timer, followed by start time,
stop time and the preset radio station to be
recorded (e.g., “TUNER FM 5”) appears in
the display.
6
Load a recordable tape into deck B.
To
Do this
Check the setting
1
Press CLOCK/TIMER
SELECT.
2
Press
M
or
m
(or
>
+
or
–
.
on the remote)
repeatedly until “PLAY
SELECT?” flashes in the
display, then press ENTER.
Change the setting
Start from step 1.
Cancel the timer
1
Press CLOCK/TIMER
SELECT.
2
Press
M
or
m
(or
>
+
or
–
.
on the remote)
repeatedly until “TIMER
OFF?” flashes in the display,
then press ENTER.
Timer recording radio
programs
continued
