22
HCD-IS10
SECTION 4
TEST MODE
1. TEST MODES OTHER THAN THE TEST MENU
These are executable test mode even if not entering the test menu.
1-1. Cold Reset
The cold reset clears data except DVD data stored in the RAM to
initial conditions. Execute this mode when returning the set to the
customers.
Procedure:
1. In the standby state, the
I
/
1
button on the set is pressed for 5
seconds or more.
2. The messages “MEMORY CLR” and “PUSH POWER” are
displayed on the fluorescent indicator tube.
3. When the
I
/
1
button is pressed in the state of step 2, the
messages “CLEARING”
t
“CLEARED!” are displayed, then
becomes standby states.
1-2. DVD Version View
Procedure:
1. Connect the set with the TV screen.
2. In the standby state, press the button in order of the
[ DISPLAY]
t
[ENTER]
t
I
/
1
on the remote commander, the DVD
version appears on the TV screen.
3. To release from this mode, press the
I
/
1
button.
1-3. Color System Change (Except US, Canadian and
Latin American models)
This mode let you change the color system of the video output from
PAL to NTSC or vice versa.
Procedure:
1. Press the
I
/
1
button to turn the power on.
2. Press the
[FUNCTION]
button on the remote commander to
select the “DVD”.
3. Press the
[SYSTEM MENU]
button on the remote commander.
4. Press the
M
m
button on the remote commander to select the
“COLOR SYS”, and press the
[ ]
button on the remote
commander.
5. Press the
M
m
button on the remote commander to select the
“PAL” or “NTSC”, and press the
[ ]
button on the remote
commander.
6. The color system is changed.
1-4. AM Step Change (Except AEP, Russian, UK and
Saudi Arabian models)
The step interval of AM channels can be toggled between 9 kHz
and 10 kHz.
Procedure:
button on the remote commander to
button on the remote commander
button on the remote commander to select
10k” appears on the
button on the remote commander, and the AM
channel step is changed.
1-5. Disc Slot Lock
This mode let you lock the disc slot. When this mode is activated,
the disc will not eject when the
Z
button is pressed. The message
“LOCKED” will be displayed on the fluorescent indicator tube.
Procedure:
1. Press the
I
/
1
button to turn the power on.
2. Press the
[FUNCTION]
button on the remote commander to
select the “DVD”.
3. Touch the
x
sensor and press the
Z
button on the set
simultaneously and hold down until “LOCKED” or
“UNLOCKED” displayed on the fluorescent indicator tube
(around 5 seconds).
1-6. Demo Disc Play
Mode to prevent theft of the demonstration disc.
Setting Procedure:
It automatically enters the mode when the demonstration disc is
inserted.
Releasing Procedure:
1. Press the
I
/
1
button to turn the power on.
2. Press the
[FUNCTION]
button on the remote commander to
select the “DVD”.
3. Touch the
x
and
N
sensor on the set simultaneously and
hold down until “DEMO OFF” displayed on the fluorescent
indicator tube (around 5 seconds).
2. TEST MODES IN THE TEST MENU
These are the test modes done in the test menu.
Setting method of the test menu:
1. Press the
I
/
1
button to turn the power on.
2. Press the button in order of the
[CLEAR]
t
[ENTER]
t
[0]
t
[1]
t
[0]
t
[ANGLE]
on the remote commander. (Make
the interval when each button is pressed within two seconds.)
3. The message “TEST MENU” appears on the fluorescent
indicator tube and enter the test menu.
2-1. Panel Test
Procedure:
1. Enter the test menu.
2. Press the
M
m
button on the remote commander to select the
“PANEL TEST”, and press the
[ENTER]
button on the remote
commander.
3. LEDs (except
N
) and all segments in fluorescent indicator
tube are lighted up. And
N
LED and half segments in
fluorescent indicator tube are lighted up, others half segments
in fluorescent indicator tube are lighted up, then LEDs (except
N
) and all segments in fluorescent indicator tube are lighted
up. This operation is repeated.
4. When all segments in fluorescent indicator tube are lighted up
in the state of step 3, press the
[]
button on the remote
commander and model information is displayed on the
fluorescent indicator tube.
Each time the
[]
button on the remote commander
is pressed, the display changes from destination information,
MC version, SUB version in this order, and returns to the model
information display.
Each time the
[VOLUME --]
button on the remote commander
is pressed, the version and date are switched.
5. In the state of step 3, press the
[FUNCTION]
button on the
remote commander and “K 0” is displayed on the fluorescent
indicator tube.
“K 0” value increases whenever a button on the set is pressed
or a sensor is touched. However, once a button has been
pressed, it is no longer taken into account.
All buttons on the set are pressed and all sensors are touched,
“OK” and “K 7” are alternately displayed on the fluorescent
indicator tube.
6. To release from this mode, press the
I
/
1
button.
www. xiaoyu163. com
QQ 376315150
9
9
2
8
9
4
2
9
8
TEL 13942296513
9
9
2
8
9
4
2
9
8
0
5
1
5
1
3
6
7
3
Q
Q
TEL 13942296513 QQ 376315150 892498299
TEL 13942296513 QQ 376315150 892498299
