1-4 (E)
HKDW-702
1-5. Installing the VIDEO OUT Assembly
1.
Remove the inside panel.
2.
Remove the two screws (P2
x
4) and remove the CN
BOX sub panel.
3.
Attach the VIDEO OUT assembly with the two screws
(P2
x
4) by routing the coaxial cable through the
groove.
m
.
When installing the VIDEO OUT assembly, route
the coaxial cable through a groove.
.
If the coaxial cable is pinched by the VIDEO OUT
assembly and the frame, the coaxial cable can be
damaged.
n
Standard tightening torque value :
Screw P2
x
4
16 to 22
x
10
_
2
N
.
m (1.6 to 2.2 kgf
.
cm)
P2
x
4
CN BOX sub panel
Coaxial cable
(black)
Groove
P2
x
4
VIDEO OUT assembly
*
1
*
1
Step 2
1-6. Installing the HKDW-702 (DC-110A
Board)
1.
Align the hole of the shield plate with connector
(CN6) of the DCP-28 board and insert the connector
(CN6) of the DC-110A board to the connector (CN6)
of the DCP-28 board.
2.
Attach the DC-110A board with the three screws (P1.4
x
3.5) supplied.
n
Standard tightening torque value :
Screw P1.4
x
3.5
0.1 N
.
m (1.0 kgf
.
cm)
3.
Connect the coaxial cable (black) coming from the
VIDEO OUT assembly to the connector (CN1) of the
DC-110A board.
1-5. Installing the VIDEO OUT Assembly
1-6. Installing the HKDW-702 (DC-110A Board)
DC-110A
board
Precision
screws
P1.4
x
3.5
DCP-28 board
Hole
Coaxial cable
(black)
CN1
CN6
CN6
Shield plate
