24
Menus
Menus
The menus displayed on the viewfinder screen enable various
settings of the camera.
The following controls are used to operate the menus.
To enter Menu mode, you can use the DISPLAY switch on the
rear panel.
Rotate the menu control knob to select menu items or values
and push on it to register (enter) the selection.
Displaying Menu Pages
Displaying a menu page
Set the DISPLAY switch to MENU.
The menu page last accessed will be displayed. If it is the first
time, the CONTENTS page of the USER menu will be
displayed.
Displaying the TOP MENU screen
If you set the DISPLAY switch to MENU while holding the
menu control knob pressed, “TOP” is displayed at the upper
right corner of the screen.
Turn the menu control knob to move the pointer (
,
) on the
display to “TOP” and push on the knob. The TOP MENU
screen is displayed, listing the available menus.
Setting the Menu
Selecting a menu on the TOP MENU screen
Rotate the menu control knob to align the pointer with the
desired menu indication then push on the knob.
The CONTENTS page (page No. 00) or the last accessed
page of the selected menu is displayed.
Selecting a page from a CONTENTS page
Rotate the menu control knob to align the pointer with the
desired page indication then push on the menu control knob.
The selected page is displayed.
INTERCOM
DISPLAY
ASSIGNABLE
PROD
ENG
PGM2
VF SOURCE
MIC
ON
BOTH
MIX SPLIT DIFF
CAM HD PROMPT
L
R
OFF
PTT
ON
OFF
MENU
PGM1
RET1
RET
2 3 4
Rear panel
DISPLAY switch
Menu control knob
<TOP MENU>
USER
USER MENU CUSTOMIZE
ALL
OPERATION
MAINTENANCE
FILE
DIAGNOSIS
Menu
Purpose
USER
This menu can include menu pages selected
from among the OPERATION,
MAINTENANCE, FILE, and DIAGNOSIS
menus, for convenience. Changing, adding,
and deleting pages can be performed with the
USER MENU CUSTOMIZE menu.
USER MENU
CUSTOMIZE
This menu allows you to edit the USER menu.
For details on the USER menu, see “Editing
the USER Menu” (page 25).
ALL
This menu permits you to control all items of
the OPERATION menu, MAINTENANCE
menu, FILE menu, and DIAGNOSIS menu as a
single menu.
OPERATION
This menu contains items for camera operators
to operate the camera. It mainly permits
viewfinder, intercom, and switch settings.
MAINTENANCE
This menu contains items for performing
camera maintenance operations, such as
changing the system or setting infrequently.
FILE
This menu is for performing file operations,
such as writing or clearing the reference file.
DIAGNOSIS
This menu enables you to confirm the self-
diagnostic information.
CONTENTS 00 TOP
01.<VF DISPLAY>
02.<'!'IND>
03.<VF SOURCE>
04.<VF MARKER>
05.<VF DETAIL>
06.<FOCUS ASSIST>
07.<ZEBRA>
08.<CURSOR>
09.<VF OUT>
10.<SWITCH ASSIGN>
If the screen can be scrolled, arrows will
indicate the direction for scrolling.
Pointer
<VF DETAIL> 05 TOP
VF DETAIL : ON 25%
CRISP : 0
FREQUENCY: 9M
FAT MODE : OFF
Page number
