40
Appendices
3D mode is set.
Setting the Channel ID
Channel ID is a function to display the identifier of the output
signal to distinguish the two HD signals in Dual-Link or
3D-L/R connection.
1
Select 3D System on the Configuration menu screen.
2
Select Channel ID.
3
Set Channel ID to ON.
Setting the 3D Camera Control
When 3D Mode is set to ON, two cameras are normally
controlled simultaneously. Some items for painting can be
controlled separately to match the color tone between the two
cameras. If Left Only or RIght Only is selected, specified items
of the selected camera can be controlled.
The 3D Camera Control function enables setting the switches
for this function on the panel.
1
Select 3D System on the Configuration menu screen.
2
Select 3D CAM Control.
3
Select a camera to be controlled.
Exit
3D Mode
ON
3D Mode
Exit
Configuration
Camera
CCU
MSU
CNU
RCP
Assignment
Multi
Format
3D
System
Exit
3D System
3D Mode
Channel
ID
3D CAM
Control
Exit
3D Mode
ON
3D Mode
Exit
Channel ID
ON
Channel ID
Exit
Configuration
Camera
CCU
MSU
CNU
RCP
Assignment
Multi
Format
3D
System
Exit
Channel ID
ON
Channel ID
Exit
3D System
3D Mode
Channel
ID
3D CAM
Control
