11
Overview
MENU:
To display menus for settings, in addition to camera
images.
m
Menu control knob (rotary encoder)
Used to select settings from menus displayed on the
viewfinder screen (by rotating it) and to confirm settings (by
pushing it). Displayed items are depending on the setting of
the DISPLAY switch.
When set to ON:
The status screen is displayed when the
knob is pressed.
When set to OFF:
The VF SOURCE message is displayed
when the knob is pressed. If the knob is pressed again
while the message is displayed, the displayed items can be
operated.
When set to MENU:
The ordinal menu operation is available.
For details, see “Screen display of the viewfinder” (page 20).
n
ASSIGNABLE button
You can assign a function by using ASSIGN REAR on the
<SWITCH ASSIGN> page of the OPERATION menu.
o
VF SOURCE switches
In 3D mode, these select the pictures to be displayed on the
viewfinder screen.
L/BOTH/R switch
L:
To display the main camera (left) picture.
BOTH:
To display the pictures of both the main (left) and sub
(right) cameras. The displayed style is selected with the
MIX/SPLIT/DIFF switch.
R:
To display the sub camera (right) picture.
MIX/SPLIT/DIFF switch
Select the display style for when the L/BOTH/R switch is set to
BOTH. The settings for each screen are made on the VF
SOURCE page of the OPERATION menu. The display style
for each camera is set with the menu of the camera.
MIX:
To display the mixed pictures from the main (left) and sub
(right) cameras.
SPLIT:
To display the pictures from the main (left) and sub
(right) cameras on a split screen.
DIFF:
To display difference between the pictures from the
main (left) and sub (right) cameras.
CAM/HD PROMPT switch
Select a picture to be displayed on the viewfinder screen.
CAM:
To display the picture from the cameras connected to
the unit. The displayed picture is selected with the L/BOTH/
R and MIX/SPLIT/DIFF switches.
HD PROMPT:
To display the picture input to the HD
PROMPTER connector on the CCU. If the output signal of
an MPE-200 Multi Image Processor is input to the HD
PROMPTER connector on the CCU, the picture processed
with the MPE-200 can be monitored on the viewfinder
screen.
CE type: Models for CE and E33
1
and
4
to
8
and
qs
to
qg
are the same as those of the SY
type.
b
PROD (producer line) control
To adjust the intercom audio listening level of the producer
line.
c
PGM1 (program 1) and PGM2 (program 2) controls
To adjust the audio listening level of program 1 or program 2,
respectively.
i
ENG (engineer line) control
To adjust the intercom audio listening level of the engineer line.
j
MIC LINE (intercom microphone line) switch
To select the talk line for intercom:
PROD:
To talk over the producer line
OFF:
To turn off the headset microphone for the intercom line
ENG:
To talk over the engineer line
k
TRACKER control
To adjust the intercom audio listening level at the TRACKER
connector on the side panel.
8
9 0 qa
qs
qd
qf
qg
1
3
2
4
5
6
7
CAMERA POWER
INTERCOM
CALL
PRO Duo
DISPLAY
ASSIGNABLE
PGM2
VF SOURCE
BOTH
MIX SPLIT DIFF
CAM HD PROMPT
L
R
EXT
OFF
CCU
ON
OFF
MENU
PGM1
RET1
RET
2 3 4
PROD
ENG
MIC
LINE
PROD
OFF
ENG
TRACKER
