66
Remote commander (remote)
The remote does not work.
c
Batteries are weak.
c
Point the remote at the remote sensor on this
unit (page 12).
c
The remote is too far from the unit.
The remote does not operate the
TV.
c
Batteries are weak.
c
Check the TV setting is made correctly
(page 13). Some buttons cannot be used
depending on the TV.
c
Make the TV setting again if you have
replaced the batteries (page 13).
Others
EXPORT or IMPORT indicator
flashes in red.
c
Turn on the unit and check the error
message.
To turn off the power by force
If the problem is still unresolved after
checking the troubleshooting guide, turn
off the power by force. Hold down the
\
/
1
(on/standby) button on the unit for more
than 10 seconds.