39
R
e
co
rd
in
g/
Pl
ay
bac
k
Playing the image on a TV
Connection methods and quality of the
image (HD (high definition)/SD (standard
definition)) viewed on the TV screen differ
depending on what type of TV is connected,
and the connectors used.
Use the supplied AC Adaptor as the power
source (p. 16).
Refer also to the instruction manuals
supplied with the device to be connected.
b
Notes
• When recording, set [X.V.COLOR] to [ON] to
play back on an x.v.Color-compliant TV (p. 65).
Some settings may need to be adjusted on the
TV when playing back. Refer to the instruction
manual of your TV for details.
You can connect your camcorder to the TV
easily following the instructions displayed
on the LCD screen, [TV CONNECT
Guide].
b
Notes
• The Handycam Station and your camcorder are
both equipped with A/V OUT jacks and
COMPONENT OUT jacks (p. 107, 110).
Connect the A/V connecting cable or
component video cable either to the Handycam
Station or to your camcorder. If you connect A/
V connecting cables or component video cables
to both the Handycam Station and your
camcorder at the same time, image disturbance
may occur.
Operation flow
Switch the input on the TV to the
connected jack.
Refer to the instruction manuals of the
TV.
r
Connect your camcorder and TV
referring to [TV CONNECT Guide].
r
Make the required output settings
on your camcorder (page 41).