8-10
Chapter 8
Effect Utilities
8
Effect Utilities
Changing Register Names – 73
It is possible to change the name of a register to any string of up to
eight alphanumeric characters. By default, every one of the 99
registers is given the name, “SNAPSHOT”, “SETUP” or
“EFFECT”.
Displaying the REGISTER NAME menu
1
Display the EFFECT UTILITY top menu.
2
Press F3 (REGISTER NAME) in the first set of soft key
indications.
The REGISTER NAME menu appears.
72
REGISTER
FUNC-
TION
SELECT
ALL
OK
CANCEL
REGISTER NAME menu soft key indications
The following is a typical operation in this menu.
Applying a new name to a register
Use the following procedure.
1
Press F2 (FUNCTION), to select “RENAME”.
The indicator to the left of the “RENAME” item lights, and a
message appears as follows.
Select registers and press [Cancel]/[OK]
2
Use F3 (
J
) or F4 (
j
) to display the required register number
in green, and then press F5 (SELECT). Alternatively, click on
the register number displayed on the screen, using the mouse.
To select all of the registers, press F6 (ALL).
A blue bar appears attached to the register number.
Repeat step
2
as necessary, if you wish to rename more than
one register.
Register Utilities
