Chapter 8
Effect Utilities
8-17
8
Effect Utilities
Loading a file – LOAD
Use the following procedure to load a register in the processor
from a floppy disk.
1
Insert the floppy disk containing the file to be loaded in the
floppy disk drive.
2
Press F8 (READ DISK).
Note
If you change floppy disks, then until you press F8 (READ
DISK) the file display is not updated.
3
Press F2 (FUNCTION) and select “LOAD”.
The indicator to the left of the “LOAD” item lights, and a
message appears as follows.
Select files and press [Cancel]/[OK]
4
Press F3 (
J
) or F4 (
j
) to display the required file number in
green, and then press F5 (SELECT). Alternatively, click on
the register number displayed on the screen, using the mouse.
To specify all reghisters, press F6 (ALL).
A blue bar appears attached to the file number, and the soft
key indication for F8 changes to “OK”.
Repeat step
4
as necessary, if you wish to load more than one
file.
5
Press F8 (OK).
6
Use the numeric keypad to enter the register number for the
first file in the range, and then press the ENTER button.
To load with the register numbers the same as the file
numbers, press the ENTER button without entering a number.
This loads the file or files.
You can abort the load by pressing F7 (CANCEL) before
pressing ENTER button.
