8-38
Chapter 8
Effect Utilities
8
Effect Utilities
Memory Recall
Assigning a register number to a memory recall button –
F4 (REGISTER ASSIGN) to F7 (LOWER ROW)
Use the following procedure.
1
Press F4 (REGISTER ASSIGN) to select the default
assignment or a user assignment.
• “Default”: this uses the following default assignments.
Upper row: 1 to 8
Middle row: 11 to 18
Lower row: 21 to 28
• “User Defined”: this uses a user-defined assignment of
register numbers.
The register numbers currently assigned in each row appear in
the menu screen.
To change the user-defined assignments only, proceed to the
following step
2
and subsequent steps.
2
Press one of F5 (UPPER ROW) to F7 (LOWER ROW) to
select the row of buttons for which you wish to make an
assignment (see page 8-35).
• F5 (UPPER ROW): Upper row
• F6 (CENTER ROW): Middle row
• F7 (LOWER ROW): Lower row
3
Enter the register number for the leftmost button in the
selected row, using the numeric keypad. Successive register
numbers are then automatically assigned to the remaining
seven buttons in the row.
4
Repeat steps
2
and
3
as required, to assign register numbers to
the other two rows.
Memory recall panel operations – F8 (MEMORY
RECALL)
To display the memory recall panel, press F8 (MEMORY
RECALL).
The memory recall panel appears.
For details, see the section “Memory Recall Panel Operations
– 501” (page 8-35).
