Chapter 10 Setup Operations
10-3
10
Setup Operations
Selection operation
In the SETUP & DIAG menu, press the required function key as
shown in the following table to select the menu.
Selecting from the first set of soft key indications
Selecting from the second set of soft key indications
Function key
Function
See page
F1 (CH ASSIGN)
Assign channel numbers.
10-5
F2 (OPERATION)
Settings related to operation.
10-7
F3 (TRACK BALL)
Adjust trackball and Z-ring.
10-10
F4 (GPI)
Set up GPI.
10-13
F5 (FREEZE
BUTTON)
Select effect of FREZE button.
10-16
F6 (SCREEN
SAVER)
Toggle the screen saver function on
and off.
10-18
F7 (OPERATION 2)
Control settings for a beeper sound
and fast access to frequently used
menus.
10-19
F8 (MORE)
Switch to the second set of soft key
indications, as shown below.
—
F6 (PROCESS
CTRL 1)
Select signal processing.
10-23
F7 (PROCESS
CTRL 2)
Select interpolation processing, and
other settings.
10-25
Switch to the third set of soft key
indications, as shown on the next
page.
F8 (MORE)
Function key
Function
See page
F3 (AUTO KEY
SELECT)
Assign particular key signals
automatically to particular video
signals.
10-21
—
