10-20
Chapter 10 Setup Operations
10
Setup Operations
Making it possible to access frequently used menus directly
from the “TOP MENU LIST” screen – F3 (PAGE 0 F-KEY)
Pressing F3 (PAGE 0 F-KEY) to select “Useful Function” causes
the titles of the following eight menus to be displayed in the
function key indications for the “TOP MENU LIST” screen (see
page 4-8).
In the “TOP MENU LIST” screen, selecting a soft key allows a
direct call to the corresponding menu.
11
BKGD
12
BORDER
13
CROP
72
REGISTER
75
SNAPSHOT
601
TRANS-
FORM
602
3D
VIEWER
610
TIME
LINE
Disabling the effect register auto save function – F4 (EFFECT
REGISTER AUTO SAVE)
Enable or disable the auto save function, which automatically
saves the current editing contents of the key frame effect register
whenever the register is called.
Enable: Use the auto save function.
Disable: Do not use the auto save function.
When set to Disable, a manual operation is required to save the
effect that you are currently editing before calling the key frame
effect register.
Toggling the power-on resume mode – F5 (RESUME CONTROL
PANEL)
Set F5 (RESUME CONTROL PANEL) to On to use the resume
function. When the system is powered on, the resume function
restores it to the state it was in immediately before being powered
off.
Toggling the internal key frame processing mode – F6 (KF
INTERPOLATE)
Select whether internal processing of key frames should be carried
out on a field or frame basis.
FIELD: Perform processing for each field.
FRAME: Perform processing for the first field only, and use the
processing results of the first field for the second field.
Settings Related to Operation 2 – 707
