Chapter 10 Setup Operations
10-21
10
Setup Operations
These settings assign the key signal to be selected automatically
when a particular video signal is selected.
After making this assignment, the automatic selection will be
carried out when F6 (AUTO KEY SELECT) in the IN/OUT
SELECT menu (see page 6-4) is set to “ON”.
With the second set of soft key indications shown in the SETUP &
DIAG menu, press F3 (AUTO KEY SELECT) to display the
AUTO KEY SELECT menu.
713 AUTO KEY SELECT
EXT
KEY
INPUT
VIDEO
Key Memory
Input Video
1
External Key
2
•
•
Off
On
KEY
MEMORY
E
G 1 2
R
AUTO KEY SELECT menu
The following operation is carried out in this menu.
Assigning the key signal to a video signal
Use the following procedure.
1
Use one of the following methods to display the input button
number for the video signal for which the setting is to be made
at the “Input Video” item.
• Press F2 (
J
) or F3 (
j
) to increment or decrement the
number.
• Press F1 (INPUT VIDEO), then enter the button number
using the numeric keypad.
2
Use one of the following methods to display the input button
number for the key signal to be assigned to the video signal
selected in step
1
, at the “External Key” item.
• Press F6 (
J
) or F7 (
j
) to increment or decrement the
number.
• Press F5 (EXTERN KEY), then enter the button number
using the numeric keypad.
This assigns the key signal.
Automatic Key Selection Settings – 713
