Attaching Accessories
14
Attaching Accessories
Attaching a Hood
You can attach the optional VFH-790 outdoor hood in the
same way as the supplied indoor hood.
This section describes the procedure of attaching the
indoor hood.
1
To attach the hood, hook the hood to the groove the
viewfinder.
2
Tighten the screw to fix the viewfinder.
Indoor hood (supplied)
HDVF-L770
The angle of the hood can be changed up to 45° upward.
HDVF-L750
Outdoor hood (optional)
When the outdoor hood is too tight to move, or too loose
to fix at a desired position, adjust the coin screws on both
sides of the hood. Turn the screws clockwise to tighten,
and counterclockwise to loosen.
Groove
HDVF-L770
Screw
HDVF-L770
Coin screw (on both sides)
HDVF-L770