51
Overview
6
Chapter
C
h
a
p
te
r 6
Sh
ot
M
a
rk
/S
hot
D
a
ta
Shot Mark/Shot Data
6-1 Overview
This unit can record shot marks or use shot marks recorded
with HDCAM comcorders or Betacam SX camcorders
(shot mark function). The shot mark function enables
quick access to the marked points, for efficient editing.
When shot data are recorded on the tape, you can display
the data and make use of them for sorting shot marks.
6-1-1 Shot Mark/Shot Data Function
Features
The shot mark function has the following features:
Recording shot marks
You can record shot marks at any position on a tape by
setting it with setup menu item 631.
For details on setup menu item 631, see page 72.
Cueing up shot marks
You can cue up the previous or next shot mark by pressing
the REW or F FWD button together with the SHIFT
button. The type of the cued-up shot mark is indicated in
the condition area. You can select the type of shot mark to
be cued up with setup menu item 630.
For details on setup menu item 630, see page 72.
Displaying shot data
Shot data are the data on recording at each recording.
Press the PLAY button together with the SHIFT button to
display the shot data.
The tape is played, and the data shown below are
displayed.
The content of the display changes as the shooting
conditions change (for example, the date and time or
shooting device change). Sections where no data are
recorded because you changed the shooting device are
blank.
To go out the display
Press the PLAY button together with the SHIFT button.
SERIAL NUMBER 010001
DATE 1998.05.11
MODEL NAME DNW 0090
TIME 12.55.10
CASSETTE NUMBER 0095
ID1 AAAAAAAAAAAA
SHOT NUMBER 0052
ID2 BBBBBBBBBBBB
ID3 CCCCCCCCCCCC
ID4 DDDDDDDDDDDD
TCR 23:59:59:29
Serial
number
Time
Shot number
Camera ID
Recorded
timecode
Date
Cassettee
number
Name of
shooting
device
