78
Items in the Extended Setup Menu
Chap
ter
9
Set
up Men
u
s
943
CROSS COLOR CRISP
Set the cross color crisp level for down-converter output.
0 to [4] to FH
950
UP CONVERTER MODE (UC) Select the up-converter mode.
[CROP]:
Select the edge-crop mode.
L-BOX:
Select the letter box mode.
SQUEZ:
Select the squeeze mode.
951
H CROP POSITION (UC)
Adjust the H-crop (the horizontal position when inserting in the edge crop mode) of
the up/down converter output when menu item 950 is set to EDGE-CROP.
–120 to [0] to 120
952
LETTER BOX POSITION
(UC)
Adjust the vertical position of the letter box mode cutout in up-converter output when
LETTER BOX is selected in menu item 950.
–120 to [0] to 120
953
UP CONVERTER PROCESS
SELECT
Select the original picture to use when converting SD to HD.
FIELD:
Use a field picture.
FRAME:
Use a frame picture.
[ADAPT] (standard mode):
Set the ratio of converting from frames or fields to the
standard ratio when up-converting.
ADAP2 (still picture priority mode):
Set the ratio of converting from frames higher
when up-converting.
ADAP3 (motion priority mode):
Set the ratio of converting from fields higher when
up-converting.
954
DETAIL GAIN (UC)
Adjust the up-converter image enhancer, the sharpness of edge emphasis.
0 to [40H] to 7FH
955
LIMITTER (UC)
Adjust the up-converter image enhancer, the maximum detail level added to
emphasize the original signal.
0 to [20H] to 3FH
956
CRISP THRESHOLD (UC)
Adjust the up-converter image enhancer. Set the threshold amplitude at which low
amplitude signals are not emphasized.
0 to [8] to FH
957
LEVEL DEPEND
THRESHOLD (UC)
Adjust the up-converter image enhancer. Set the luminance range for edge
enhancement.
0 to [8] to FH
958
H DETAIL FREQUENCY (UC) Adjust the up-converter image enhancer. Set the central frequency and frequency
characteristic for edge enhancement.
3.2MHz:
3.2 MHz
±
1.1 MHz
4.5MHz:
4.5 MHz
±
1.4 MHz
[5.0MHz]:
5.0 MHz
±
0.7 MHz
4.0MHz:
4.0 MHz
±
2.0 MHz
959
H/V RATIO (UC)
Adjust the up-converter image enhancer. Set the horizontal/vertical ratio for edge
enhancement.
0 to [3] to 7
960
GAMMA LEVEL (UC)
Adjust the up-converter image enhancer, the slope of the correction curve.
0 to [80H] to 100H
961
BACKGROUND COLOR (UC) Set the color of the background (no material part) when up-converting.
Sub-item
1
BG COLOR
Set the color.
[BLACK]:
Black
GRAY:
Gray
BLUE:
Blue
TABLE:
Use the TABLE settings.
2
Y TABLE
Adjust the Y level of the background.
[0] to FFH
3
B-Y TABLE
Adjust the B-Y level of the background.
0 to [80] to FFH
4
R-Y TABLE
Adjust the R-Y level of the background.
0 to [80] to FFH
Item
number
Item name
Settings