76
Items in the Extended Setup Menu
Chap
ter
9
Set
up Men
u
s
a) Not applicable in 24PsF/23.98PsF mode
812
AUDIO OUTPUT LEVEL
Set the audio output level.
[+4 dB] 0 dB –3 dB –20 dB
Note
−
20 dB is not displayed in the display window.
823
a)
NAU FLG PB
Controls the non-audio flag when the playback format is Betacam SX.
Sub-item
1
CH1/CH2
During Betacam SX playback, sets the non-audio flag of a digital audio output as
follows.
[OFF]:
OFF (the data is audio)
ON:
ON (the data is non-audio)
Notes
• During playback of analog tapes, the non-audio flag is OFF regardless of the setting
for this item.
• In the HDCAM format, the non-audio flag follows the setting for maintenance menu
item M372 during recording and in E-E mode. During playback, it follows the setting
recorded on the tape.
For details on the maintenance menu item M372, refer to the Maintenance Manual.
2
CH3/CH4
824
ANALOG LINE OUTPUT
SELECT
Select audio channels output from the AUDIO OUTPUT connectors on the rear panel.
[CH1/2]:
Output the audio channels 1 and 2.
CH3/4:
Output the audio channels 3 and 4.
826
AUDIO VOLUME SELECT
Assign the audio channels to the REC LEVEL adjustment knobs and PB LEVEL
adjustment knobs on the front panel.
[CH1/2]:
Assign the audio channels 1 and 2.
CH3/4:
Assign the audio channels 3 and 4.
1(3)/2(4):
Assign the audio channels 1/3 and 2/4.
REC4:
Assign the audio channels 1 to 4 for recording.
PB4:
Assign the audio channels 1 to 4 for playback.
832
ANALOG AUDIO INPUT
MODE
Select the signal recorded on audio channels 3 and 4 when an analog audio input is
selected.
[OFF]:
No recording
PARA:
Recording channel 1 on channel 3, and channel 2 on channel 4
833
CUE AUDIO INPUT
SELECT
Select the digital audio channel recorded on cue channel.
OFF:
No recording
CH1+2:
Recording audio channels 1 and 2
CH3+4:
Recording audio channels 3 and 4
[CH1]:
Recording audio channel 1
CH2:
Recording audio channel 2
834
AUDIO INPUT LEVEL
Set the analog audio input.
Sub-item
1
CH1
[LINE]:
line input
MIC:
microphone input
2
CH2
3
LINE LEVEL
Set the line input level.
[+4 dB] 0 dB –3 dB –20 dB
835
CUE REC LEVEL ATT
Set the recording level on the cue track.
0 dB [–3 dB] –6 dB –9 dB –12 dB
836
DIGITAL AUDIO MUTING
IN FF/REW MODE
Select whether the playback sound is muted in fast forward or rewind mode if the
playback format is HDCAM or Betacam SX.
OFF:
The playback sound is not muted.
[ON]:
The playback sound is muted.
Item
number
Item name
Settings
