102
Connecting with an HDMI cable
Superior video and audio quality can be obtained when the
HDMI cable is used to connect the server to a TV. This
connection type outputs both the audio and video signals so only
one cable is required.
To switch the output resolution for the HDMI
OUT jack
Select [Settings] – [Video Settings] – [Output Resolution
Priority] – [HDMI]
◆
Notes about the HDMI OUT jack
• When you connect the server to an AV amplifier (receiver)
using an HDMI cable, you will need to do one of the following:
– Connect the AV amplifier(receiver) to a TV with the HDMI
cable.
– Connect the server to the TV with a video cable other than the
HDMI cable (component video cable, S VIDEO cable, or video
cable).
• When connecting to the HDMI OUT jack, carefully align the
HDMI connector with the jack. Do not bend or apply pressure
to the HDMI cable.
z
Hint
Connection to DVI devices is not guaranteed.
Notes
• Pictures and sound may be interrupted before the devices recognize the
connection.
• If you connect a component that does not conform to the selected audio
signal, a loud noise (or no sound) will come out from the speakers,
which could damage your ears or speakers.
PUSH/OPEN
AC IN
CONTROL S IN/
IR IN
HDMI OUT
COMPONENT VIDEO OUT
AUDIO OUT
R
R-AUDIO-L
VIDEO
LINE
IN 1
OUT
S VIDEO
Y
PB
PR
LAN(10/100)
COAXIAL
DIGITAL OUT
PCM/DTS/
DOLBY DIGITAL
L
OPTICAL
HDMI OUT
HDMI IN
TV
Server
To HDMI OUT
HDMI cable (supplied)
To HDMI input jack
Summary of Contents for HES-V1000 - Home Entertainment Server
