63
2
Press the 5-way control key towards
FR
or
FF
(turn the jog dial on the
remote control) to adjust the point to
divide.
Pressing the control key (turning the
jog dial) moves the dividing point
forward or backwards. The dividing
point can be moved up to a maximum
of 8 seconds forward or backwards
from the point T MARK was pressed
in step 1.
3
Press the 5-way control key (jog dial
on the remote control) to enter the
dividing point.
z
You can use the Speed Control function during
the Divide Rehearsal function. This allows you
to reduce the playback speed (page 51) to carry
out the division more accurately.
To add track marks while
recording (except while
synchro-recording)
Press T MARK on the recorder at the
point you want to add a track mark.
You can use Time Mark to add track
marks automatically at specified intervals
(except while digital recording) (page 39).
Combining tracks
(Combine)
When you record with analog (line) input,
unnecessary track marks may be recorded
where recording level is low. You can
erase a track mark to combine the tracks
before and after the track mark.
The track numbers will change as follows.
This operation can be done on the
recorder only.
•
You cannot erase a track mark on a track that
has been transferred from your computer.
•
You cannot erase a track mark on a track that
has been recorded in Hi-MD mode using the
MD Simple Burner software.
•
You cannot combine tracks recorded in
different recording mode.
1
While playing the track with the track
mark you want to erase, press
X
to
pause.
The point
T MARK is
pressed in
step 1.
The moved four-second interval plays back
repeatedly.
The dividing point shifts a
maximum of 8 seconds
forward or backwards.
Notes
1
3
4
2
1
3
2
Erase a track mark
Track numbers decrease
T MARK
5-way control key
(FR)
X
continued
Summary of Contents for Hi-MD Walkman MZ-NH1
