30
SETU
P
SETU
P
S
E
TU
P
SETU
P
Set
up
SETU
P
Satellite Receiver
and VCR
To connect a satellite receiver and VCR
1
Connect the CATV cable to the single (input) jack of the splitter.
2
Use a coaxial cable to connect one of the splitter’s two output
jacks to the TV’s VHF/UHF jack.
3
Use a coaxial cable to connect the splitter’s other output jack to
the satellite receiver’s VHF/UHF input jack.
4
Connect the satellite antenna cable to the satellite receiver’s
satellite input jack.
5
Use a coaxial cable to connect the satellite receiver’s VHF/UHF
output jack to the VCR’s VHF/UHF input jack.
6
Use an A/V cable to connect the satellite receiver’s A/V output
jacks to the TV’s A/V input jacks.
7
Use an A/V cable to connect the VCR’s A/V output jacks to the
TV’s A/V input jacks.
8
Run Auto Program, as described in “Setting Up the Channel List”
on page 39.
Notes on Using This Connection
Using
S VIDEO jacks?
See page 23.
To Do This ...
Do This ...
Watch the satellite receiver
Press
TV/VIDEO
repeatedly to select the satellite receiver input (VIDEO 3 in
the illustration).
Watch the VCR
Press
TV/VIDEO
repeatedly to select VCR input (VIDEO 1 in the illustration).
Set up the TV remote control
to operate the satellite
receiver or VCR
If you have a non-Sony VCR or satellite receiver, you must program the
remote control. See “Programming the Remote Control” on pages 46-47.
Activate the TV remote
control to operate the satellite
receiver or VCR
For the satellite receiver, press
SAT/CABLE FUNCTION
. For the VCR, press
DVD/VCR FUNCTION
.
Control satellite receiver and
VCR functions with the TV
remote control
See “Operating a Satellite Receiver” on page 48 and “Operating a VCR” on
page 48.
Label video inputs to easily
identify equipment connected
to the TV
See the instructions for setting up Video Labels on pages 72-73.
AX1X.book Page 30 Wednesday, June 30, 2004 9:21 AM
