9(E)
1
RET 1 (return video 1) button
Pressing this button will allow viewing of the return
video 1 signal on the viewfinder screen.
2
RET2 (return video 2) and AUX 1 / AUX 2 /
AUX 3 buttons
Simultaneously pressing the RET 2 button and the
AUX 1, AUX 2, or AUX 3 button will allow viewing
of the return video 2, 3, or 4 signal from the HDCU on
the viewfinder screen.
3
CURSOR STORE button
Press this button to store the size and position of the
box cursor.
Note
If the CURSOR ON button
5
is not lit, box cursor
information cannot be stored.
4
H-POSI (horizontal position) control
Adjusts the horizontal position of the box cursor
displayed on the viewfinder screen.
5
WIDTH control
Adjusts the width of the box cursor displayed on the
viewfinder screen within the safety zone.
See the description of the SAFETY ZONE switch.
6
V-POSI (vertical position) control
Adjusts the vertical position of the box cursor
displayed on the viewfinder screen.
7
HEIGHT control
Adjusts the height of the box cursor displayed on the
viewfinder screen within the safety zone.
See the description of the SAFETY ZONE switch.
Rear Panel (right side)
RET 2
RET 1
AUX 1
AUX 2
AUX 3
STORE
CURSOR
H-POSI
V-POSI
ON
WIDTH
HEIGHT
CALL
1
2
3
Y
R
G
B
1
RET 1 button
4
H-POSI control
5
WIDTH control
7
HEIGHT control
8
CURSOR memory 1, 2,
and 3 buttons
9
CURSOR ON button
!º
Video signal selection
switch
!¡
CALL button
2
RET 2 and AUX 1 /
AUX 2 / AUX 3 buttons
3
CURSOR STORE button
6
V-POSI control
Pushrod hole
Summary of Contents for HKCA-700
Page 48: ......