HT-CT780
24
2-4. MC Version Display Mode
It can display the MC (
-com) version.
Procedure:
1. Enter the test menu.
(Refer to “Setting method of the test mode menu” on page 22)
2. Press the []/[VOLUME –] buttons to select the
“MC.X.XXX” (X.XXX: MC (
-com) version).
(Displayed values in the above
fi
gure are example)
2-5. Serial Flash Version Display Mode
It can display the SF (serial
fl
ash) version.
Procedure:
1. Enter the test menu.
(Refer to “Setting method of the test mode menu” on page 22)
2. Press the []/[VOLUME –] buttons to select the
“SF.X.XX” (X.XX: SF (serial
fl
ash) version).
(Displayed values in the above
fi
gure are example)
2-6. DSP Sound Number Display Mode
It can display the SN (DSP sound number).
Procedure:
1. Enter the test menu.
(Refer to “Setting method of the test mode menu” on page 22)
2. Press the []/[VOLUME –] buttons to select the
“SN XXX” (XXX: DSP sound number (000 to 998)).
(Displayed values in the above
fi
gure are example)
Note:
“SN ---” is displayed when the information of serial
fl
ash is not able
to be acquired.
2-7. BT Module F/W Version Display Mode
It can display the BT (Bluetooth) module
fi
rmware version.
Procedure:
1. Enter the test menu.
(Refer to “Setting method of the test mode menu” on page 22)
2. Press the []/[VOLUME –] buttons to select the
“BTM.X.XX” (X.XX: BT (Bluetooth) module
fi
rmware ver-
sion).
(Displayed values in the above
fi
gure are example)
2-8. AMP Test Mode
(It is displayed “AMP” on the
fl
uorescent indicator tube)
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-9. Tone Test Mode
It can check the test tone output from each speaker.
Preparation:
Connect the Bar Speaker (SA-CT780) and the Subwoofer (SA-
WCT780) by wireless.
Procedure:
1. Enter the test mode menu.
(Refer to “Setting method of the test mode menu” on page 22)
2. Press the []/[VOLUME –] buttons to select the “T
TONE”, press the [INPUT] button.
3. The message “TONE.ON” is displayed on the
fl
uorescent indi-
cator tube momentarily and enter the tone test mode.
4. The output speaker is displayed on the
fl
uorescent indicator
tube. At the same time, test tone is output from speaker.
(The output speaker repeatedly changes automatically in fol-
lowing order)
Output speaker
Display
Front L-ch
FL
Front R-ch
FR
Subwoofer
SW
Releasing method:
Press the [
?/1
] button to release the test mode menu.
2-10. Speaker Test Mode
(It is displayed “SPK.TST” on the
fl
uorescent indicator tube)
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-11. VACS Display Mode
(It is displayed “V. DISP” on the
fl
uorescent indicator tube)
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-12. VACS ON/OFF Mode
(It is displayed “V.ONOFF” on the
fl
uorescent indicator tube)
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
2-13. DSP Halt Mode
(It is displayed “DSP.HLT” on the
fl
uorescent indicator tube)
Not used for the servicing.
Press the [
?/1
] button if having entered this mode.
