HT-CT780
9
2-3. HOW TO INSTALL THE CONNECTION CABLE WITH SPEAKER (L-CH, R-CH) (SPC1, SPC2)
1
Connect the terminal
[gray] (wide side).
5
Connect the terminal
[black] (narrow side).
6
Connect the terminals
[black] and [blue] (wide side).
8
Connect the terminals
[gray] and [black] (narrow side).
9
Wrap up wire from speaker (19 mm) and
connection cable with speaker (SPC1).
qf
Paste the cushion (CZ).
qf
Paste the cushion (CZ).
0
Pass the cable underneath catcher.
7
Wrap up wire from speaker (19 mm) and
connection cable with speaker (SPC1).
2
Push the cable
into the slots.
qs
Push the cable
into the slot.
3
Pass the cable underneath catcher.
qd
Pass the cable
underneath
catcher.
4
Pass the cable along the rib.
qa
Pass the cable along the speaker (19 mm).
1
Connect the terminal
[red] (wide side).
5
Connect the terminal
[black] (narrow side).
6
Connect the terminals
[black] and [blue] (wide side).
8
Connect the terminals
[gray] and [black] (narrow side).
9
Wrap up wire from speaker (19 mm) and
connection cable with speaker (SPC2).
qf
Paste the cushion (CZ).
qf
Paste the cushion (CZ).
0
Pass the cable underneath catcher.
7
Wrap up wire from speaker (19 mm) and
connection cable with speaker (SPC2).
2
Push the cable
into the slots.
qs
Push the cable
into the slot.
3
Pass the cable underneath catcher.
qd
Pass the cable
underneath
catcher.
4
Pass the cable along the rib.
qa
Pass the cable along the speaker (19 mm).
rear side
front side
left side
left side
right side
right side
top block
bottom block
bottom block
CN501
CN502
Push
Push
Push
Push
Push
Push
Push
Push
Push
Push