O
ther O
p
e
ratio
ns
masterpage:Right
lename[E:\SEM_Janet\DDW760_3rdrevision\J9040000_4252086131DDW760GB\4252086131\
GB070TH_HT-DDW760-U.fm]
35
GB
model name1[HT-DDW760]
[4-252-086-
13
(1)]
You can set the receiver to turn off automatically
at a specified time. Use the remote for the
operation.
1
Press ALT to light up the button.
2
Press SLEEP while the power is on.
Each time you press SLEEP, the display
changes cyclically as follows:
2-00-00
t
1-30-00
t
1-00-00
t
0-30-00
t
OFF
While using Sleep Timer, “SLEEP” lights up in
the display.
Tip
To check the remaining time before the receiver turns
off, press ALT to light up the button (page 38), then
press SLEEP. The remaining time appears in the
display. If you press SLEEP again, the sleep timer will
be canceled.
Before you begin, make sure you have
connected all components properly.
Recording on an audio tape or
MiniDisc
You can record on a cassette tape or MiniDisc
using the receiver. See the operating instructions
of your cassette deck or MD deck if you need
help.
1
Select the component to be recorded.
2
Prepare the component for playing.
For example, insert a CD into the CD
player.
3
Insert a blank tape or MD into the
recording deck and adjust the
recording level, if necessary.
4
Start recording on the recording deck,
then start playback on the playback
component.
Notes
• Sound adjustments do not affect the signal output
from the MD/TAPE OUT jacks.
• The analog audio signals of the current input is
output from the MD/TAPE OUT jacks.
• (Models of area code CEL, CEK only) The signals
input to the MULTI CH IN jacks are not output from
the MD/TAPE OUT jacks even when MULTI CH IN
is being used. The analog audio signals of the current
or previously used input are output.
Using the Sleep Timer
Recording
continued
GB01COV_HT-DDW760-U.book Page 35 Tuesday, April 20, 2004 3:10 PM
