masterpage:Left
lename[D:\SONY SEM 2005\Revision Data\HT-
DDW870\J9050000_2549734151DDW870UCA\2549734151\GB04BSC_HT-DDW870-UCA.fm]
28
GB
model name1[HT-DDW870]
[2-549-734-
15
(1)]
A
SW:
Lights up when the audio signal is output
from the SUB WOOFER jack.
B
LFE:
Lights up when the disc being played
back contains the LFE (Low Frequency
Effect) channel and the LFE channel signal is
actually being reproduced.
C
SP A/SP B:
Lights up in accordance with the
speaker system being used (A or B). Turns off
when speaker output is turned off or when
headphones are connected.
D
;
DIGITAL EX:
“
;
DIGITAL” lights up
when Dolby Digital signals are input.
“
;
DIGITAL EX” lights up when Dolby
Digital EX signals are input.
Note
When playing a Dolby Digital format disc, be
sure that you have made digital connections and
that INPUT MODE is not set to “ANALOG”
(page 35).
E
;
PRO LOGIC IIx:
“
;
PRO LOGIC”
lights up when the receiver applies Pro Logic
processing to 2 channel signals in order to
output the center and surround channel
signals. “
;
PRO LOGIC II” lights up when
the Pro Logic II Movie/Music/Game decoder
is activated. “
;
PRO LOGIC IIx” lights up
when the Pro Logic IIx Movie/Music/Game
decoder is activated.
Note
Dolby Pro Logic IIx decoding does not function
for DTS format signals or for signals with a
sampling frequency of more than 48 kHz.
F
DTS-ES 96/24:
“DTS” lights up when DTS
signals are input. “DTS-ES” lights up when
DTS-ES signals are input. “DTS 96/24” lights
up when the receiver is decoding DTS 96 kHz/
24 bit signals.
Note
When playing a DTS format disc, be sure that you
have made digital connections and that INPUT
MODE is not set to “ANALOG” (page 35).
G
NEO:6:
Lights up when DTS Neo:6 Cinema/
Music mode decoding is activated.
H
Tuner indicators:
Lights up when using the
receiver to tune in radio stations, etc. See
pages 23–26 for tuner operations.
Note
“RDS” appears for models of area code CEL,
CEK only.
I
D.RANGE:
Lights up when dynamic range
compression is activated (page 36).
J
COAX:
Lights up when the source signal is a
digital signal being input through the
COAXIAL terminal or when INPUT MODE is
set to “
COAX IN” (page 35).
K
OPT:
Lights up when the source signal is a
digital signal being input through the
OPTICAL terminal or when INPUT MODE is
set to “
OPT IN” (page 35).
L
SLEEP:
Lights up when sleep timer is
activated.
About the indications in the display
L
C
R
SL
SB
S
SR
LFE
SP A
DIGITAL EX
PRO LOGIC IIx DTS-ES
NEO:6
RDS
D.RANGE
STEREOMONO
SLEEP OPT COAX
96/24
SP B
;
;
MEMORY
SW
9
qs
qd
q;
qa
2
1
4
3
5
6
7
8
GB01COV_HT-DDW870-UCA.book Page 28 Monday, June 20, 2005 4:43 PM
