HT-GT1.GB.4-542-874-
12
(1)
24
GB
Tuner
Listening to the radio
1
Press FU/– repeatedly
to select the tuner function.
2
For automatic scanning:
Hold down /– until the
frequency begins to change on the
display.
Scanning stops automatically and
“TUNED” lights up on the display
when a station is found.
If “TUNED” does not light up and
scanning does not stop, press
to
stop scanning. Then, perform
manual tuning (below).
For manual tuning:
Press /– repeatedly to tune
to the station you want.
Note
When you tune to an FM station that
provides RDS services, information such
as the service name or station name is
provided by broadcasts. You can check
the RDS information by pressing DISPLAY
repeatedly.
Hint
To reduce static noise on a weak FM
stereo station, press FM MODE repeatedly
until “MONO” lights up on the display. You
will lose the stereo effect, but reception
will improve.
Presetting radio stations
You can store up to 20 FM stations
as your favorite stations.
1
Tune to the station you want.
2
Press TUNER MEMORY.
Preset number
3
Press /– repeatedly to
select the preset number you
want, then press .
“COMPLETE” appears on the display
and the station is stored.
If another station is already
assigned to the selected preset
number, that station is replaced by
the new one.
To listen to the preset station
Press /– repeatedly to
select the preset number you want.
Summary of Contents for HT-GT1
Page 51: ...51GB Additional Information ...
