24
GB
Enjoying Multiplex
Broadcast Sound (AUDIO)
You can enjoy multiplex broadcast
sound when the system receives a
Dolby Digital multiplex broadcast signal.
Press AUDIO repeatedly.
The channel changes cyclically as
follows.
Main
Sub
Main/Sub
To receive a Dolby Digital signal, you need
to connect a TV or other devices to the TV
IN (OPTICAL) jack with the optical digital
cable (supplied).
Saving Power
Consumption
To use the system while saving power
consumption, change the following
settings.
When you set the auto standby function
to on, the system enters standby mode
automatically when you do not operate
the system for about 20 minutes and
the system is not receiving an input
signal.
Hold down MOVIE/MUSIC for 5
seconds to set the function to on or
off.
Main
Outputs only the main channel.
The MOVIE and MUSIC indicators flash twice.
Sub
Outputs only the sub channel.
The MOVIE indicator flashes twice.
Main/Sub
Main sound is output from the left speaker
and sub sound is output from the right
speaker.
The MUSIC indicator flashes twice.
Note
AUDIO
Turn the System Off by
Detecting the Using State
Auto standby on
The USB and ANALOG indicators flash twice.
The default setting for U.K./Ireland models is
on.
Auto standby off
The USB indicator flashes twice.
The default setting for Australia/New
Zealand models is off.
MOVIE/MUSIC
