17
US
1
Prepare two screws (not supplied)
that are suitable for the wall
mount holes on the rear of the Bar
Speaker.
2
Stick WALL MOUNT TEMPLATE
(supplied) on a wall.
1
Align TV CENTER LINE (
) of
WALL MOUNT TEMPLATE with the
center line of your TV.
2
Align TV BOTTOM LINE (
) of
WALL MOUNT TEMPLATE with the
bottom of your TV, then stick
WALL MOUNT TEMPLATE on a
wall by using a commercially
available adhesive tape, etc.
3
Fasten the screws into the marks
(
) on SCREW LINE (
) of WALL
MOUNT TEMPLATE as in the
illustration below.
4
Remove WALL MOUNT TEMPLATE.
5
Attach the cushion pads
(supplied) below the holes on the
rear of the Bar Speaker.
Hole on the rear of the Bar Speaker
4 mm (3/16 in)
More than 30 mm (1 3/16 in)
5 mm
(7/32 in)
10 mm
(13/32 in)
Center of the TV
WALL MOUNT
TEMPLATE
Adhesive tape,
etc.
Screws
Marks (
)
5 mm to
6 mm
(3/16 in to
1/4 in)
200 mm
(7 7/8 in)
200 mm
(7 7/8 in)
Cushion
pad
Summary of Contents for HT-S200F
Page 41: ......
Page 87: ......
Page 132: ... 2018 Sony Corporation Printed in Malaysia 4 727 414 11 1 http www sony net ...
