Specifications
Flash
Flash Type
Auto electronic
flash (clip-on type)
Flash Modes
Automatic Light
Control (TTL),
Continuous (10
flashes/second,
up to 40), pre-flash
control, manual
control
Flash Coverage
Bounce angles:
Upward - 150
degrees; Left - 90
degrees; Right - 90
degrees; Down - 8
degrees
Flash Metering
System
Direct TTL
Guide Number
43
Modes
Wireless, Bounce,
Modeling, Multi-
burst
Number of
Flashes
10/sec. up to 40
total
Power Source
Four AA-size
batteries, Alkaline
of Ni-MH
Recycling Time
2.9sec
Dimensions (Approx.)
Dimensions
(Approx.)
(WHD) 3 x 5-1/8 x
3-1/2" (75 x 129 x
87 mm)
Weights and Measurements
Weight
(Approx.)
12 oz (340g)
(excluding AA
batteries)
Power
Battery Type
AA Alkaline /AA
Ni-MH - requires 4
General
Material
Poly-carbonate
plastic
Operating Conditions
Storage
Temperature
-4 to +140
degrees;F (-20 to
+60 degrees ;C)
Accessories
Supplied
Accessories
Case
Mini Stand
Sealing materials are set at joints of outer materials (body, LCD panel, Mounting Foot etc.) and
around movement/operating parts thereby increasing the life of your flash unit.
Modeling light capability
Modeling light capability allows the HVL-F43AM to pulse, helping photographers determine
where shadows will fall before taking the picture, so they can alter lighting or subject positioning
as necessary.
Retractable wide-angle panel
Retractable wide-angle panel (15mm angle)
Wireless Ratio Control
Wireless Ratio Control allows customers to wirelessly control up to three groups of flashes, as well
as specify the luminosity ratio for each group, so they can enjoy multiple-flash lighting techniques
without the need for special equipment or tedious exposure settings.
Simple controls
Simple controls, test button, power saving mode
TTL metering
TTL metering capability, high-speed sync
Fast recharging
Fast recharging -- up to 38% quicker than HVL-F36
