60
Connections for a Linear Editing System
Chapt
er 5 Conne
c
tio
ns
a
nd Set
tings
f
o
r Edit
ing
Connections for a Linear Editing System
• When using this unit as a recorder for editing in
DVCAM format
- It is not possible to edit audio channels individually.
However, if all audio channels are selected, insert
editing is possible.
- You can set a cut or fade-in/fade-out in audio edit
points using the menu.
- When video insert editing is carried out, timecode data
is also rewritten in such manner as to maintain
continuity from the In point.
- For linear editing using an i.LINK input, if controlled
through the RS-422A interface, the edit points are
offset. Use i.LINK also for control interface.
•
When using this unit as a HDV format player
When using this unit as an HD linear editing player, this
unit does not support synchronization. Either turn the
controller’s player synchronization function off, or set it
to “Preroll & Play”.
This unit cannot be used as recorder for HDV linear editing
to carry out assemble or insert editing. HD-SDI input can
be recorded only in normal recording mode using the REC
button.
Editing in DVCAM format using an external controller
Using an RM-280
The following figure shows a connection example for a
DVCAM format linear editing system comprising a DSR-
1500A/1500AP as the player, this unit as the recorder., and
an RM-280 Editing Controller.
Notes
Note
