86
Menu Contents
Chapt
er
7
Men
u
s
Auto mode execution (AUTO FUNCTION) menu
The following table shows the purpose and function of the
items in the auto mode execution menu.
For details of the use of individual items, see “Digitally
dubbing signals in HDV/DVCAM/DV format” (page 67)
and “Rerecording the Timecode – TC Insert Function
(DVCAM Format Only)” (page 70).
SDI H-ANC [> SDI H-ANC]:
Select whether to add
RP188 LTC and aspect
ratio data to the ancillary
data space of the SD-SDI
output.
RP188LTC [>> RP188LTC]:
RP188 timecode
OFF [>>> OFF]:
Do not embed an LTC signal.
*
ON [>>> ON]:
Output an embedded LTC signal.
ASPECT [>> ASPECT]:
Aspect ratio data
OFF [>>> OFF]:
Do not embed aspect ratio data.
*
ON [>>> ON]:
Output embedded aspect ratio data.
SYSTEM SEL [System Sel]: Settings related to system
selection
Description of settings
Select system frequency to use.
*
59.94i (UC) [> 59.94i UC]:
For NTSC regions other than
Japan
59.94i (J) [> 59.94i J]:
For Japan
50i (PAL) [> 50i PAL]:
For PAL regions
Note
After changing the setting, press the POWER switch to power
off the unit, then press once more to restart. This changes the
initial settings of the entire setup menu to the new setting.
SETUP BANK OPERATION [Setup Bank]: Settings related
to menu bank operations
Description of settings
Menu banks: This unit allows four different complete sets of menu settings to be saved in what are termed “menu
banks” numbered 1 to 4. Saved sets of menu settings can be recalled for use as required.
RECALL BANK1 [> Recall 1]:
Recall menu settings from
menu bank 1.
(1) Select the bank from which you want to recall the menu
settings, then press the
,
/
B
button.
Message “RECALL OK?” appears.
(2) To recall, press the SET (YES) button.
To quit recalling, press the RESET (NO) button.
RECALL BANK2 [> Recall 2]:
Recall menu settings from
menu bank 2.
RECALL BANK3 [> Recall 3]:
Recall menu settings from
menu bank 3.
RECALL BANK4 [> Recall 4]:
Recall menu settings from
menu bank 4.
SAVE BANK 1 [> Save 1]:
Save current menu settings to
menu bank 1.
(1) Select the bank to which you want to save the menu
settings, then press the
,
/
B
button.
Message “SAVE OK?” appears.
(2) To save, press the SET (YES) button.
To quit saving, press the RESET (NO) button.
SAVE BANK 2 [> Save 2]:
Save current menu settings to
menu bank 2.
SAVE BANK 3 [> Save 3]:
Save current menu settings to
menu bank 3.
SAVE BANK 4 [> Save 4]:
Save current menu settings to
menu bank 4.
MENU GRADE [Menu grade]: Selection of menu items to
be displayed
Description of settings
Determine whether to display basic items only or both
basic and enhanced items on the monitor screen and in
the time counter display when using the menu.
*
BASIC [>> Basic]:
Display basic items only.
ENHANCED [>> Enhanced]:
Display both basic and
enhanced items.
INTERFACE SELECT [Interface]: Settings related to
external interfaces
Description of settings
