91
Assigning a Function to the ASSIGN Button
Chap
te
r 7
Men
u
s
2
Press the SET (YES) button.
The setting returns to its factory default and is saved in
memory.
To return all settings to their factory default
settings
1
Press the MENU button to display the menu selection
level.
2
Press the
,
/
B
button to display level 1 of the setup
menu.
3
Press the RESET (NO) button.
A message appears, asking whether or not you wish to
return all settings to their factory default settings.
4
Press the SET (YES) button.
The message “NOW SAVING...” appears on the
monitor screen, and “Saving...” appears in the time
counter display, while the settings of all items are
returned to their factory default settings. These factory
default settings are saved in memory.
If you power off the unit before saving operation is
completed, the new settings may not be correctly
returned to their factory default settings. Wait until the
saving is completed before powering off the unit.
To abandon the resetting operation
Instead of pressing the SET (YES) button, press the
RESET (NO) button. The display returns to menu level 1,
leaving the settings unchanged.
Assigning a Function to
the ASSIGN Button
You can assign a desired menu item (a function, in other
words) on level 1 or level 2 to the ASSIGN button. Once
you assign a frequently-used menu item, you can recall it
by simply pressing the ASSIGN button.
Menu items that can be assigned to the
ASSIGN button
You can assign any BASIC menu item on level 1 or level
2 of the setup menu to the ASSIGN button regardless of
the setting of the MENU GRADE menu item. If you want
assign a ENHANCED menu item, it is necessary to set
MENU GRADE to ENHANCED.
To assign a function to the ASSIGN button
Use the following procedure.
1
Press the MENU button.
The monitor screen shows the menu selection level
display.
2
With SETUP MENU selected, press the
,
/
B
button.
All basic items in setup menu level 1 are displayed.
Monitor screen
message
INITIALIZE ALL ITEMS TO
FACTORY PRESET VALLUES?
Message in the time
counter display
Init setup?
Note
A
B
MENU
RESET(NO)
SET(YES)
TC
PRESET
ASSIGN
2,3,5,7
1
8
4
6
Setup menu
S Y S T E M M E N U
S E T U P M E N U
A U T O F U N C T I O N
H O U R S M E T E R
Monitor screen
Time counter display
