8
Overview
o
STATUS/CANCEL switch
STATUS:
To display status information of this camera in the
viewfinder when no menu is displayed with the DISPLAY/
MENU switch set to DISPLAY.
CANCEL:
To cancel changed settings or return the display to
the previous menu when a menu is displayed in the
viewfinder.
p
Menu control knob (rotary encoder)
Used to select settings from menus displayed on the
viewfinder screen (by rotating it) and to confirm settings (by
pushing it).
This knob functions the same as that on the rear operation
panel.
Front left
a
Shoulder strap fitting post
Attach one end of a shoulder strap (optional, part No. A-6772-
374-C) to this fitting post and the other end to the fitting post
on the other side of the camera.
b
VF (viewfinder) connector (20-pin)
Connect the cable of the viewfinder (optional).
c
Filter select knob
Used to select the built-in ND filters (1: clear, 2: 1/4 ND, 3:
1/16 ND, 4: 1/64 ND).
d
SHUTTER switch
When the camera is used in standalone status without
connecting a CCU, use this switch to turn ON or OFF the
electronic shutter and change (SEL) the shutter speed and
shutter mode.
For details, see “Setting the Electronic Shutter” (page 16).
e
AUTO W/B BAL (white and black balance automatic
adjustment) switch
To automatically adjust white and black balance when the
camera is used in stand-alone status without connecting to a
CCU.
WHT:
To automatically adjust white balance.
BLK:
To automatically adjust black balance.
For details, see “Adjusting the Black Balance and White
Balance” (page 15).
f
INTERCOM LEVEL control
To adjust the intercom/earphone volume level.
The intercom level adjustment is enabled when the LEVEL/
MIC switch on the UC-type operation panel
or the
LEVEL switch on the CE-type operation panel
rear is set to “FRONT.”
g
RET (return video) button
When this button is pressed, the picture on the viewfinder
changes to the return video signal selected with the RET 2/3/
4 select switch
on the operation panel on the rear of
the camera.
You can also assign other functions with a menu operation.
h
LENS connector (12-pin)
Connect the lens cable. The camera can control the lens
functions through this cable.
i
MIC 1 IN (microphone 1 input) connector (XLR 3-pin)
Connect a microphone.
This connector and the AUDIO IN CH1 connector are
alternately activated with the MIC 1 select switch on the rear
connector panel.
j
Tripod mount (bottom)
Attach the VCT-U14 Tripod Adaptor when mounting the
camera on a tripod.
For details, see “Mounting the Camera to a Tripod” (page 13).
Rear
a
Tally lamp and switch
ON:
The tally lamp lights when a tally signal is input to the
connected CCU or a call signal is generated in response to
pressing of a CALL button.
OFF:
The tally lamp is prevented from lighting.
b
Shoulder strap fitting post
c
Operation panel
(See “Operation panel”.)
d
Camera Control Unit (CCU) connector (triax
connector)
Connect an HXCU-100 or HSCU-300 Camera Control Unit
using a triax cable.
9
0
8
1
2
3
4
5
6
7
7
6
4
1
2
3
5
9
0
8
Summary of Contents for HXC-100
Page 43: ...43 Appendices ...
Page 44: ...Printed in Japan ...