36
GB
Adding Priority Mark(s)
— Priority Mark Function
Usually the recorded messages are lined up in the order of recording.
By adding priority marks (
v
) to important messages, you can renumber
the messages in the order of their priority. There are four levels, “
vvv
”
(the most important), “
vv
”, “
v
”, and no priority mark. You can add
priority marks both in the stop mode and in playback mode.
1
Select or play back the message you want to mark.
2
Press PRIORITY.
“PRIORITY” will flash on the display window.
3
Press the jog lever up or down (
>/
.
) to select the number of priority
mark(s) (
v
) while “PRIORITY“ is flashing.
4
Press ENTER.
The setting is finished and the messages will
be renumbered.
To cancel setting priority mark(s)
Press CANCEL before step 3.
PRIORITY
ENTER
CANCEL
Jog lever (
>/.
)
