background image

Setting the Clock

Set the time when the CD or radio is turned off.

1

Plug in the unit.
The display will flash “AM 12:00”.

2

While holding down 

TRACK/CLOCK

,

press either 

TIME SET/TRACK +

 or 

until the correct time appears in the
display.
When you release 

TRACK/CLOCK

, the

clock begins to operate and “:” flashes.

• To set the current time rapidly, keep pressing

the 

+

 or 

 button while holding down 

TRACK/

CLOCK

.

• To set the current time from zero seconds, at

step 

2

, release 

TRACK/CLOCK

 with the time

signal.

Playing a CD

An 3-inch (8 cm) CD can be played without an
adaptor.

1

Lift 

LIFT OPEN

 to open the CD

compartment lid and place a disc.

Lift.

Label surface up.

Close the lid.

2

Press 

CD

 

^

 and the display lights

“01”.  The current number (01 to 99)
appears in the display window.  After
10 seconds, the indication becomes the
current time, but the “CD 

(

 “

indication remains.

3

Adjust 

VOLUME

.

Locating a Particular Portion

Locating a particular selection (AMS*)

To locate the beginning of the current selection,
press 

=

.

To locate the next selection, press 

+

.

Locating a particular point in a selection
(SEARCH)

To go back at high speed, keep 

=

 pressed.

To go ahead at high speed, keep 

+

 pressed.

* AMS is the abbreviation of Automatic Music

Sensor.

• If you press 

=

 repeatedly, the player locates

the previous selections.  If you press 

+

repeatedly, the player locates the next
selections and stops at the last selection.

• To stop play, press 

OFF/ALARM RESET

.

• To pause, press 

CD

 

^

 and the “CD 

(

 “

indication flashes.  To resume play, press

CD

 

^

 again.

• To change the clock mode to track mode, press

TRACK/CLOCK

.

Press 

TRACK/CLOCK

 again, and the current

time appears.

• To eject a disc, lift 

LIFT OPEN

.

• To handle compact discs

This way

Handle the disc
by its edge.

Not this way

Do not touch the
surface.

Do not stick paper or
tape nor write
anything on the
surface.

Notes

• Do not open the CD compartment lid while

playing, otherwise, the disc will be damaged.
Be sure to stop the disc first.

• When you press 

CD

 

^

, if there is no disc in

the CD compartment, the “00” indication
flashes for 10 seconds and the unit will be
turned off.

• If the 

 alarm is activated while

listening to the CD, the track changes to that
preset by pressing 

WAKE UP TRACK

.

Playing the Radio

1

Press 

RADIO/SLEEP

 to turn on the

radio.
The “RADIO” indication will appear
and the “On” indication will appear in
the display.  After 10 seconds, the
indication becomes the current time but
the “RADIO” indication remains.

2

Adjust 

VOLUME

.

3

Select the 

BAND

.

4

Tune in a station using the 

TUNING

dial.

• To turn off the radio, press 

OFF/ALARM

RESET

.

• To improve radio reception

FM:

Extend the FM wire antenna to improve
FM reception.

AM:

Rotate the unit horizontally for optimum
reception.  A ferrite bar antenna is built
into the unit.

Do not operate the unit over a steel desk
or metal surface, as this may lead to
interference of reception.

Setting the Alarm

You can set the CD, radio and buzzer alarms at
the preset time.  Before setting the alarm, be sure
to set the clock. (See “Setting the Clock”.)

To set the Alarm Time

To set the 

 alarm :

1

While holding down 

ALARM A

, press

either 

TIME SET/TRACK

 

+

 or 

 until the

desired time appears in the display
window.
The “

” indication flashes and

“:” lights.

2

Release 

ALARM A

.  The alarm time is

set and the indication becomes the
current time.

3

While holding down 

WAKE UP TRACK

,

set the desired track by pressing 

=

 or

+

.

4

Release 

WAKE UP TRACK

.  The track is

preset and the indication becomes the
current time.

Note

When the CD player is preset to start with track
5, it will always start with track 5 even though
you change the CD, unless you change 

WAKE

UP TRACK

.

To set the 

/

 alarm :

1

While holding down 

ALARM B

, press

either 

TIME SET/TRACK +

 or 

 until the

desired time appears in the display
window.  The “ 

 ” and

“ 

 ” indication flash and “:”

lights.

2

Release 

ALARM B

.  The alarm time is

set and the indication becomes the
current time.

To set the Alarm Mode

Before setting the alarm mode, be sure to set the
alarm time. (See “Setting the Alarm Time”.)

Press 

ALARM MODE

 until the alarm you want

appears in the display window.
Each time you press 

ALARM MODE

, the alarm

indication changes as follows.

No alarm
indication

and

and

ALARM ON—

When the alarm comes on at the preset time,

”, “

” or “

” flashes

in the display.

No¡tes

• The alarm does not function, unless you set the

clock and 

/

/

alarm.

• If you set the CD alarm and radio or buzzer

alarm at the same time, the CD alarm sounds.

• When you set the CD alarm, if there is no disc

in the CD player, the buzzer will sound at the
time you set.

• When the CD alarm comes on, the “

indication flashes.
If you want to stop flashing, press 

CD

 

^

.  The

CD player will stop playing at the last track.

• When the radio alarm is activated, the

” indication flashes.  If you want

to keep on listening to radio and stop flashing,
press 

RADIO/SLEEP

.  The “

indication remains.

• The buzzer sound level is fixed, and

independent of  

VOLUME

.

,,

,,

yy

yy

,,,

,,

yyy

yy

,,,

,,

yyy

yy

To Doze for a Few More
Minutes

Press 

SNOOZE/SLEEP OFF

.  The CD, radio or

buzzer will shut off but will be activated
automatically after about 8 minutes.  You can
repeat this process as many times as necessary.

• While 

SNOOZE/SLEEP OFF

 function is

operating, the  alarm indication flashes.

ALARM OFF—

The alarm is turned off automatically after 60
minutes.

To Stop the Alarm

Press 

OFF/ALARM RESET

 to turn off the alarm.

The alarm will come on again at the same time
the next day.

To Cancel the Alarm

• To cancel the alarm, while holding down

ALARM MODE

, press 

OFF/ALARM RESET

.

• To check the alarm time you set, press 

ALARM

A

 or 

ALARM B

.

Setting the Sleep
Timer

You can enjoy falling asleep to the radio using
the built-in sleep timer that turns off the radio
automatically after a preset duration.

Press 

RADIO/SLEEP

 repeatedly.

The radio turns on and the “On” indication will
appear initially in the display. The radio will
turn off automatically after the selected preset
duration has elapsed.
Each time you press 

RADIO/SLEEP

, the duration

changes as follows.

  

Radio on 
(Sleep timer off)

90 min

60 min

30 min

Radio off

15 min

• To turn off the radio before the preset duration

has elapsed, press 

SNOOZE/SLEEP OFF

.

To Use Both Sleep Timer
and Alarm

You can fall asleep to the radio and you will be
awakened by the CD, radio or buzzer alarm at
the preset time.

1

Set the alarm. (See “Setting the
Alarm”.)

2

Set the sleep timer. (See “Setting the
Sleep Timer”.)

ALARM

ALARM MODE

TRACK/

CLOCK

WAKE UP

TRACK

–   TIME SET/TRACK   +

RADIO

CD

SLEEP

ALARM RESET

SNOOZE / SLEEP OFF

VOLUME

TUNING

BAND

AM FM

LIFT OPEN

AC power cord

FM wire antenna

Reviews: