102
Configuring System Alert Settings
C
h
a
p
te
r 4
A
ppli
c
at
ion S
e
ttings
Configuring System Alert
Settings
A system alert (alarm) can be generated when camera
video loss or insufficient disk space is detected. Configure
the settings for the action to perform after a system alert is
generated.
1
Click [Server] at the top of the Configuration window.
The Server Configuration screen appears.
2
Select the server for which you want to set the system
alert settings from the [Server] tree on the left of the
screen.
3
Configure the information to notify of in the system
alert on the [System Alert] tab, and click [Apply].
For details on each of the items, refer to
of the [System Alert] Tab” (page 102)
.
1
Select the check boxes for the notification items,
and configure each item.
2
Click [Apply].
The settings are saved.
4
Configure the action to perform after a system alert
occurs.
For details on actions, refer to
.
Setting Items of the [System Alert] Tab
This tab is displayed by clicking [Server] in the
[Configuration] window, and clicking the [System Alert]
tab.
After configuring each item, click [Apply].
A
VIDEO LOSS
Select the check box to notify of the image signal
becoming disconnected.
Disconnection of the audio signal or disconnection of an
NSBK-A16 video signal is not a target for detection.
Camera List
This displays a list of the video loss notification settings.
Target
Select the check boxes for the cameras to be target for
notification.
Camera Name
This displays a list of the names of the cameras
registered to NSR.
1
2
Note
D
F
E
C
A
B
Summary of Contents for Ipela NSR-1050H
Page 138: ......
