108
Monitoring
Chapt
er 5
Oper
at
ion and
C
ont
ro
l
When the Camera pane is not displayed, click
and
select [Camera] from the menu that appears to switch to
the Camera pane.
Changing the Layout
Select a layout on the [Layout] toolbar at the top of the
main screen to change the layout.
Monitoring Using Layout Tours
You can perform monitoring using the layout tour function
for sequentially switching the display shown on the display
at a preset time.
To use the layout tour function, a layout tour needs to be
configured in advance. For the configuration procedure,
refer to
“Configuring Layout Tours” (page 60)
.
1
Select a layout tour on the [Tour] toolbar at the top of
the main screen.
2
Click
(Layout Tour Start).
The sequence operation starts.
If you click
again, the layout tour ends.
Monitoring Audio from Cameras
If you are using a camera with support for audio input, you
can monitor the audio input from the camera.
Select the monitor frame for which you want to monitor
the audio to output audio from the camera assigned to the
selected monitor frame.
If multiple monitor frames are selected, audio is only
output from the camera of the one selected last.
Adjusting the Volume
1
Click
(Adjust Volume).
The Volume Control dialog box appears.
2
Adjust the volume with the slider, and click [OK].
When you want to disable the sound, select the [Mute]
check box.
In the disable state, audio is no longer output no matter
which monitor frame you select.
Note
Note
Note
Slider
Summary of Contents for Ipela NSR-1050H
Page 138: ......
