18
Changing Initial Settings with the Setup Menu
Chap
te
r 2
A
d
m
inis
tra
tion M
e
nu
Setting Items of Server Name Screen
Enter the server name of NSR, and click [OK].
If you do not set a server name, NSR appends the last four
digits of the MAC address of the computer on which it is
installed to a default name, such as “NSR1050_DB12”.
Setting Items of SNMP Menu Screen
Select [Agent] when configuring an SNMP community,
and [Traps] when configuring an SNMP trap, and click
[OK].
x
Setting Items of SNMP Agent Screen
Configure each item, and click [OK].
Enable
Select this to enable the SNMP agent function.
Disable
Select this to disable the SNMP agent function.
Community
Enter the SNMP community name.
Contact
Enter the contact.
Normally, enter the mail address of the system
administrator.
Location
Enter the installation location of NSR.
The MIB-2 object of “System” or “SystemUptime”
indicated with the object ID “.1.3.6.1.2.1.1” or
“.1.3.6.1.2.1.25.1.1” can be obtained.
x
Setting Items of SNMP Traps Screen
Configure each item, and click [OK].
Enable
Select this to enable the SNMP traps function.
Disable
Select this to disable the SNMP traps function.
Host IP Address
Enter the IP address of the traps host.
Community
Enter the SNMP community name.
Shutdown Events
Notify when the NSR shuts down.
Temperature Events
Notify when the temperature of NSR rises.
Voltage Events
Notify when the voltage is abnormal.
Fan Events
Notify when the fan is abnormal.
UPS Events
If a UPS is connected, notify when the UPS has detected a
power cut, and when the UPS has detected recovery from
the power cut.
Power Events
Notify when a power malfunction occurs.
Note
Note
Summary of Contents for Ipela NSR-1050H
Page 138: ......
