33
Alarms and Events / Displaying Configuration Window
Chapter
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
4
Application Settings
Alarms and Events
You can configure sensor inputs, VMD, manual actions,
and other triggers as alarms or events on the NSR, and
record or execute actions in response. Although alarms and
events are nearly identical in function, the following
functions are enabled when you configure triggers of
higher priority as alarms.
• When searching for recordings, you can search for
alarms and events separately.
• Alarm logs are listed in the alarm history of the Main
screen, and the ALARM lamp in the Main screen lights.
• A red frame appears around the monitor frame of the
camera that triggered the alarm.
• Images from the camera that triggered the alarm appear
in the hot spot.
• You can confirm alarms and events separately in the
event/alarm log.
As shown in the table below, you can configure a
recording or action for the source that will become the
trigger. In addition, the trigger will be determined as an
alarm depending on the configured recording or action.
1) An action is performed but is not determined to be an
event or action.
Displaying Configuration
Window
You can configure various settings in the Configuration
window.
1
Click
(Configuration) on the top right of the
main screen.
The Configuration window appears.
2
Click the button of the item you want to set at the top
of the window.
The configuration screen that corresponds to the
button appears.
Source to
become
trigger of
event/alarm
Recording/Action Corresponding to
Event/Alarm
Recording setting
Action setting
Event
record
Alarm
record
Camera
action I/O
Client
action
Sensor input
a
(event)
a
(alarm)
a
(alarm)
a
(event)
VMD
• VMD
(camera)
• VMD
(recorder)
• VMF
a
(event)
a
(alarm)
a
(alarm)
a
(event)
System alert
–
–
a
(alarm)
a
(event)
Manual action
–
–
a
1)
a
1)
Summary of Contents for Ipela NSR-1050H
Page 138: ......
