43
Registering Devices
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
Setting Items of Add Device Dialog Box
Enter the setting items when registering a device manually.
This dialog box is displayed by clicking
(Add) on the
Device Configuration screen
After configuring each item, click [OK].
Device Model
Select the model name for the camera.
Normally, select “Auto Connect.”
When setting this manually, select the model name.
Name
Enter the name to assign to the camera to be added. It can
be up to 32 characters and consist of alphanumeric
characters and some symbols (periods (.), hyphens (-),
underscores (_)).
IP Address
Enter the IP address or the host name for the camera.
Port
Enter the port number on the camera side for when
connecting with the camera. The default setting is “80.”
Proxy
Set this when the camera will be accessed via a proxy
server.
Enable
Select the check box, and configure the following
items.
IP Address
Enter the IP address or the host name for the proxy
server.
Port
Enter the port number for the proxy server.
User
Enter the user name for connecting to the device. It can be
up to 32 characters and consist of alphanumeric characters
and some symbols (periods (.), hyphens (-), underscores
(_)).
Password
Enter the password for connecting to the device. It can be
up to 32 characters and consist of alphanumeric characters
and some symbols (periods (.), hyphens (-), underscores
(_)).
OK
This registers the device with the set values, and closes the
dialog box.
Cancel
This cancels the registration, and closes the dialog box.
Summary of Contents for Ipela NSR-1050H
Page 138: ......
