45
Configuring Camera Video Settings
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
Monitoring
Configure settings related to images for when monitoring.
Codec
Set the image codec for the camera. Select JPEG,
MPEG4 or H.264.
Image Size
Select the resolution for the camera.
Image Quality (for JPEG)
Select the image quality for images of the camera.
Bit Rate (for MPEG4 or H.264)
Select the bit rate for images of the camera.
Frame Rate
Select the frame rate for images of the camera.
Light Funnel
Select the mode to use when the camera has a light funnel
function.
The light funnel function may not be able to be used
depending on the conditions. For details, check the user’s
guide for the camera.
Threshold
Select the brightness for when to switch to night mode.
Hold Time
Select the time for responding to changes in
brightness.
View-DR
Select whether the View-DR function is turned on or off
for cameras equipped with this function.
Turning on the View-DR function allows the camera to
improve the visibility of images, reducing overexposure
and underexposure even in high-contrast environments,
such as under backlighting, by combining the normal
image with an image taken at high shutter speed.
Visibility Enhancer
If the camera is equipped with the Visibility Enhancer
function, select [High], [Middle], [Low], or [Off] as the
amount for the camera to automatically adjust the image
brightness and contrast.
When you turn on the Visibility Enhancer function, the
camera optimizes the contrast pixel-by-pixel,
compensating for the overexposure of bright areas and for
the underexposure of dark areas. This allows the camera to
record a vivid image even in high-contrast environments,
such as under backlighting.
If you do not want to use the Visibility Enhancer function,
select [Off].
XDNR
If the camera is equipped with the XDNR function, select
[High], [Middle], [Low], or [Off] as the strength of the
noise reduction filter applied by the camera to reduce the
amount of image noise.
When you turn on the XDNR function, the camera
distinguishes between noise occurring in areas of the
image without motion and those with motion, and
performs the appropriate noise reduction on each for better
image visibility.
This improves the effectiveness of the camera under
lowlight conditions.
If you do not want to use the XDNR function, select [Off].
IR Illuminator
If the camera is equipped with the IR illuminator function,
configure the operations of the infrared sensor.
Mode
Select [Sync with Day/Night] or [Off].
When [Sync with Day/Night] is selected, the infrared
sensor operates in coordination with the switch
between day and night.
If you do not want to use the infrared sensor, select
[Off].
Maximum Strength
Select the maximum strength of the infrared beam.
Six levels are available for the maximum strength,
with 1 as the weakest and 6 as the strongest.
Note
Summary of Contents for Ipela NSR-1050H
Page 138: ......
