46
Configuring Camera Operations
C
h
a
p
te
r 4
A
ppli
c
at
ion S
e
ttings
Configuring Camera
Operations
In NSR, you can configure the following settings for
camera operations.
•
“Configuring Preset Positions” (page 46)
You can configure preset positions for the camera.
•
“Configuring Camera Tours” (page 47)
You can configure camera tours for sequentially moving
a camera to the pan, tilt, and zoom positions specified for
presets.
•
You can configure the areas to mask for the camera.
•
“Configuring Control Protocol of Analog Camera”
(page 51)
You can configure settings for controlling the pan, tilt,
and zoom on an analog camera.
Configuring Preset Positions
This section describes configuring camera preset
positions.
These settings are only available for cameras with a
function for configuring preset positions. The items and
buttons on the [Preset] tab are unavailable for cameras
without a function for configuring preset positions.
Configuring a New Preset Position
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the camera for which you want to configure the
preset position, and click the [Preset] tab.
Images from the camera are displayed in the preview
area.
3
Configure each item.
1
Select the field of the position (position number) to
create the preset, and enter the preset name.
2
Confirm the images in the preview area while
operating the pan, tilt, and zoom to adjust the
camera position.
You can also select a preset, and move the camera
to the preset position.
3
Click [Set preset].
The current camera position is stored as a preset.
When creating multiple presets, repeat Steps
1
to
3
.
The number of presets depends on the type of camera
used. For details, refer to the user’s guide for your
camera.
4
When you have finished configuring the settings, click
[Apply].
Changing Preset Settings
1
Select the camera for which you want to change the
preset position, and click the [Preset] tab.
2
When changing the preset name, re-enter the preset
name in the list at the top of the screen.
3
When changing the preset position, operate the pan,
tilt, and zoom to adjust the camera position.
4
Click [Set preset].
The settings are changed.
Note
1
3
2
Summary of Contents for Ipela NSR-1050H
Page 138: ......
