52
Configuring Camera Operations
C
h
a
p
te
r 4
A
ppli
c
at
ion S
e
ttings
Configuring Network Camera
Control
You can configure settings to control pan and tilt speed
based on the zoom level of the camera.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the network camera, and click the [Control] tab.
3
Select the [Auto Pan & Tilt Speed] check box, and
click [Apply].
Pan and tilt speed will be controlled based on the zoom
level of the camera.
Configuring Audio
Configure settings for monitoring audio.
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the camera for which to enable audio, and click
the [Audio] tab.
3
Configure each item, and click [Apply].
Enable
Select this check box to allow the NSR to receive
audio from the camera.
To monitor audio, the microphone input on the camera
must also be enabled.
If you clear the check box to disable audio and then
play back a recording that was created while audio was
enabled, the audio will not play back. To play back the
audio in such cases, select the check box and re-enable
audio first.
Codec
Specify the audio codec.
Audio from the camera can now be monitored.
Caution
Summary of Contents for Ipela NSR-1050H
Page 138: ......
