65
Configuring Motion Detection Settings
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
2
Configure each item on the [VMD] tab, and configure
the motion detection area.
For details on each of the items, refer to
of [VMD] Tab (VMD (Camera))” (page 65)
.
1
Select the [Enable] check box.
2
Select [VMD (Camera)].
3
Configure the motion detection area while checking
the preview.
4
Click [Apply].
The motion detection area is configured.
Setting Items of [VMD] Tab (VMD (Camera))
This tab is displayed by clicking [Device] in the
[Configuration] window, and selecting [VMD (Camera)]
on the VMD tab.
After changing the settings, click [Apply] to save your
settings.
The setting items
C
and
G
differ depending on the
camera you are using.
A
Enable
Select the check box to enable the motion detection
function.
B
Type of Motion Detection Function
Select [VMD (Camera)] here.
The following setting items differ depending on the motion
detection function that is selected here.
C
Motion Detection
Performs camera-based motion detection or object
detection.
When you select this option, configure settings such as the
motion detection area on this screen.
D
VMF (Camera)
If the camera is equipped with VMF detection functions,
select this to enable motion detection using the VMF
configured on the camera. When this is selected, be sure to
configure the VMF setting in the camera-side settings
screen (Web browser).
E
Pulse
Select the check box when you wish to specify a pulse
duration and input a pulse.
If you select this, enter a value for [Pulse Duration].
Pulse Duration
Enter the duration in milliseconds to sustain pulse
input from the VMD (camera) pin once it is turned on.
4
2
1
3
Note
I J K
B
A
H
G
F
E
CD
Summary of Contents for Ipela NSR-1050H
Page 138: ......
