68
Configuring Motion Detection Settings
C
h
a
p
te
r 4
A
ppli
c
at
ion S
e
ttings
1
Click [Device] at the top of the Configuration window.
The Device Configuration screen appears.
2
Select the camera that will be the target for processing
from the [Device] tree.
3
Add the VMF package.
1
Select the [VMF] check box.
2
Click [Add], select whether to add a motion
package or object package from the Select Package
Type dialog box that appears, and click [OK].
The package is added.
4
Configure each item, and configure the VMF package.
A VMF package consists of a combination of up to
three filters (motion detection criteria), with advanced
settings for each filter, and up to six inactive areas.
Follow the procedure below to configure filters and
inactive areas.
For details on each of the items, refer to
1
Select the [Enable] check box.
2
Select the package to configure.
3
Change the package name, as necessary.
4
Select how the filters are combined ([Sequential] or
[Parallel]).
For sequential configurations, be sure to configure
two or more filters.
To switch between sequential and parallel, the
button for each
filter and inactive area must be turned off. When a
button is
(On),
click to set it to
(Off).
5
Set the filter name and filter type.
6
Click
to set the
button to
(On)
When the button is
(On), the criteria can be set.
7
Configure the criteria while checking the preview.
Repeat Steps
5
to
7
to configure the remaining
filters and inactive areas in the same way.
1
2
Note
Caution
9
1
8
4
2
5
6
3
7
Summary of Contents for Ipela NSR-1050H
Page 138: ......
