79
Configuring Recording Schedules
C
h
ap
te
r 4
A
pplic
at
io
n
S
e
tti
n
gs
6
Configure each item.
Screen example: When internal hard disk
Specify the number of partitions, select the size to
allocate each partition as a percentage, and click [OK].
Screen example: When NSRE-S200
1
Select the NSRE-S200 you want to configure, and
click [Partition].
When an NSRE-S200 is connected, use a UPS.
2
Specify the number of partitions, select the size to
allocate each partition as a percentage, and click
[OK].
The newly created partitions and added NSRE-S200
become available as storage.
7
Refer to
“Configuring Storage Settings” (page 72)
and configure the storage.
Configuring Recording
Schedules
You can configure a recording schedule for each camera to
perform recording at regular intervals, and start recording
when an alarm or event occurs.
There are the following types of schedule.
•
Schedule Recording (Normal Recording)
This records images from cameras at regular intervals
according to the set schedule.
•
Alarm Recording
This begins recording only when an alarm occurs within
the time set for the schedule.
•
Event Recording
This begins recording only when an event occurs within
the time set for the schedule.
You can use the following procedures to configuring
schedules.
•
Configuring Schedules with Automatic Camera
Registration
Configure an automatic recording schedule with
conditions that have been provided in advance.
•
Configuring Schedules Manually
You can manually configure the durations for
performing schedule recording, alarm recording, and
event recording. The duration setting methods are
“recurrent schedule,” which allows you to repeat
schedules weekly, and “date & time schedule,” which
allows you to specify specific dates and times to run
schedules.
•
Configuring Alarm Recording/Event Recording
You can configure an alarm recording/event recording to
begin recording only when an alarm or event occurs
within the duration configured for the schedule.
Before you set alarm recording or event recording,
configure the inputs that will be the alarm triggers and the
motion detection function. For the setting procedure, refer
to
“Configuring Motion Detection Settings” (page 62)
and
“Configuring Sensor Inputs” (page 88)
Record Segmenting in Continuous Long-
term Recording
When you record continuously over a long period (such as
from 00:00 to 24:00 every day for a long time), the number
of configuration files for a record may exceed 10,000
1)
.
When this happens, the record is segmented, and
subsequent data is recorded as a new record. If a record is
Caution
Caution
Summary of Contents for Ipela NSR-1050H
Page 138: ......
