96
Configuring Action Settings
C
h
a
p
te
r 4
A
ppli
c
at
ion S
e
ttings
Setting Items of Manual Action Screen
You can configure manual action settings.
The items that are displayed differ depending on the device
for performing the action.
After configuring each item, click [Apply] to save your
settings.
Name
Enter the name of the action. It can be up to 32 characters
long.
Show on the Main Window
Select the check box to show this layout in the [Action]
pane of the main window.
Register as OFF Action
Select the check box to register an action as an off action.
Off actions operate as shown below.
Tour:
Stops the tour
Alarm Output:
Turns off alarm output
Beep:
Stops the beep
[Camera Action] Tab
Number of Settings
This displays the number of cameras target for the
action.
[Add Device] Button
This displays a dialog box for adding a camera as a
target for the action.
Camera Drop-down Menu
Select a camera.
Camera Control
Select the check box to perform an action for
controlling the camera, and specify the control
method.
Preset
This returns the camera to the specified preset
position.
Tour
This performs the specified camera tour.
Action End Preset
Specify the preset position for when the action
ends.
Pin List
Select the check boxes for the pins to be target for
performing an action to change the pin state.
[I/O Device Action] Tab
Number of Settings
This displays the number of IO devices target for the
action.
[Add Device] Button
This displays a dialog box for adding an IO device as
a target for the action.
IO Device Drop-down Menu
Select the I/O device.
Pin List
Select the check boxes of the pins for which to change
the state.
Summary of Contents for Ipela NSR-1050H
Page 138: ......
