117
Controlling Cameras
Chap
ter
5
Oper
at
ion and
C
ont
ro
l
x
Performing Zooming In and Out Operations
When using a mouse with a scroll wheel, you can zoom in
and out by rotating the wheel.
• Rotate the wheel forward to zoom in.
1)
• Rotate the wheel backward to zoom out.
1)
1) Zooming in and out with digital zoom is not supported.
Using Camera Presets
You can move the camera to preset positions stored on the
camera.
You can also configure a new preset. For the configuration
procedure, refer to
“Configuring Preset Positions”
1
Select any monitor frame, and display the images of
the camera you want to control.
2
Select a preset in [Preset] on the Camera Control pane.
The camera moves to the preset position.
Performing Camera Tours
You can perform “tours,” in which the camera moves
successively to preset pan, tilt, and zoom positions. The
camera only stops at each preset position for the duration
set in advance.
Using the shadow tour function, you can also perform
tours of camera motions recorded manually.
To use the camera tour or shadow tour functions, a camera
tour or shadow tour must be configured beforehand. For
details on configuring a tour, see
.
1
Select any monitor frame, and display the images of
the camera you want to control.
2
Select a camera tour in [Tour] on the Camera Control
pane, and click
(Start Camera Tour).
Tours labeled P-1, P-2, etc. are camera tours and S-1
to S-4 are shadow tours.
The camera tour is performed.
Note
Note
Summary of Contents for Ipela NSR-1050H
Page 138: ......
