60
Settings Related to Monitoring
C
h
a
p
te
r 4
A
ppli
c
at
ion S
e
ttings
Assigning Cameras to Monitor
Frames
Assign a camera for displaying images to each monitor
frame.
1
Select a layout from the [Layout] tree on the Layout
Configuration screen.
2
Assign the cameras to monitor frames.
The following methods are available for assigning
cameras.
• Drag and drop a camera from the [Device] tree to a
monitor frame.
• Select a monitor frame, and select a camera from the
[General] tab at the bottom of the screen.
Configuring a Second Monitor
When a second monitor is installed, select the layout to use
for the second monitor and configure settings related to
monitor frames.
A second monitor can only be used as the hotspot monitor.
The 1×1, 2×2, 3×2, 3×3, and 4×4 layouts are provided in
advance for a second monitor. It is not possible to assign
cameras, change monitor frames, etc.
1
Select “2nd Display” from the [Layout] tree on the
Layout Configuration screen.
2
Configure each item.
1
Select the layout to use.
2
Configure settings related to monitor frames, as
necessary.
For details on the setting items, refer to
of “When a monitor frame is selected:”
3
Click [Apply].
The settings are saved.
Configuring Layout Tours
You can set a layout tour for sequentially switching the
display shown on the display at a preset time during
monitoring.
Creating a New Layout Tour
1
Select “Layout Tour” from the [Layout] tree on the
Layout Configuration screen, and click
(Add).
Note
2
1
Summary of Contents for Ipela NSR-1050H
Page 138: ......
